This is my first tutorial, so if you have any questions please feel free to ask. I tried to take lots of pictures so that it would be easier to follow along.
So let’s get this started:
If you guys are like me, you have lots of random little boxes around your house. From shoe boxes to the half carton the juice box flats come in, I save boxes. Last fall, I took my kids to Build-A-Bear to make gifts for Daddy. He got a “Tinker Bear” and a “Spiderman Puppy” (both totally adorable but for some reason I didn’t take pictures) and the kids had a blast. And at the time, I thought to myself “I could use these boxes for …”, but a week later, I still had the boxes and no clue what I had intended to do with them (a common occurrence at our house, I assure you). Well, I decided to use them for storing yarn, but let’s face it, those boxes just aren’t pretty. So I prettied them up.
For this project, you’ll need:
- Wrapping paper to suit your style and needs
- Empty box (or two or three)
Remove the top flaps from the box (if your box has them). This may seem obvious, but those flaps will not stay down unless you staple them that way and it’s just easier to remove them. You can tear them off or cut them. Just try to keep the line across the top as even as possible.
Begin wrapping the sides as you normally would any box, starting with the sides. Make sure to leave paper hanging over both ends. You don’t want your box to show through around that top edge. You may or may not want the paper to completely cover the inside of your box. If you do want to paper the inside of your box, I find it easier to do this with scraps AFTER the rest of the box is done.
Fold the paper over the open edge of the box. This allows you to wrap the bottom of the box as flat as possible with worrying too much about messing up the paper. Trim off any excessive paper at the bottom of the box.
Flip the box so that the open end is on your workspace (for me this was the floor in the hallway because my kids were playing Kinectimals in the living room). Begin wrapping the bottom of the box as you would any other box. Keep in mind that if your box will be standing upright (as opposed to lying on its side), you will want to wrap the bottom as tightly and as flat as possible. This minimizes the risk that the box will lean or fall when you’re finished.
I planned for my boxes to lie on their sides, so I didn’t care what the bottom looked like. My motto with DIY projects is “As long as people will see it, make it pretty. If they don’t, just get it done.”
Stand the box back up on it’s newly wrapped end and begin working on the inside of the box. My best advice, is start in a corner. My preferred corner is the one with the lower paper closest to it (when you initially wrapped the sides of your box, the paper overlapped, I use the lower part of the overlapping section to start). Using two pieces of tape in each corner (one on each adjoining wall), tape the paper down to lie as flat as possible. It’s okay if the paper bunches a little, as long as it’s bunching in the corners and NOT along the flat side. I like to put a piece of tape in the middle of the wall as well, this helps to keep the center flat and forces excess paper to the corners where the bunching is okay.
BEFORE & AFTER
Once you are satisfied with the look of your box, you’re done. This really couldn’t be more simple than it is. If you’re looking for something a bit more “formal” and involved, here’s a great tutorial using fabric instead of wrapping paper by Maven of the House.
I’ve done some other DIY projects lately, that I think you all would enjoy:
I added storage to my bathroom courtesy of a great tutorial found at Simply DIY 2